Forged Steel Gate Valve

The opening and closing parts of gate valves are gate plates, and the movement direction of the gate plates is perpendicular to the direction of the fluid. The gate valves can only be fully opened and closed, and can not be adjusted or throttled. The gate has two sealing surfaces. The two sealing surfaces of the most commonly used mode gate valves form wedges and wedge angles that vary with the parameters of the valve, usually 50 and 2 52'when the medium is not high. The sluice gate of a wedge valve can be made into a whole, called a rigid gate, or a sluice which can produce a small amount of deformation to improve its craft and make up for the deviation produced by the angle of the sealing surface in the process of processing, which is called an elastic gate.

The opening and closing part of the thread gate valve is a plug valve, the sealing surface is flat or conical, and the valve flap moves straight along the centerline of the fluid. The motion form of the stem has the lifting rod type (the stem lift, the handwheel not lifting), also the lifting and rotating rod type (the handwheel and the stem rotates with the lift, the nut is located on the body).

KOSEN Cryogenic Gate valve refers to the valve with working temperature below -110Degree C and widely used in area of LNG, LPG and other cryogenic medium. There are two different types of bonnet designing. One is bolted bonnet, i.e. the body is connected with bonnet by bolts & nuts with spiral wound gasket(If required, metal ring gasket could be provided) between. And the other type is welded bonnet, i.e. the bonnet is welded to body directly. Cryogenic Gate valve is used to connect pipe and fitting or its accessories. Flanged connection has the features of easy installation, good connection strength and good excellent sealing performance. The flange connection consists of flanges, bolts, nuts and gasket. When we fasten the connecting bolts, it would press the sealing gasket between the flange which would have elastic deformation and fill all the small space between the two flanges' sealing face, thus to realize the good sealing.

KOSEN Cast steel Gate Valves are primarily used for stop valves fully opened or fully closed .They are not normally considered for throttling purposes,but more for slurries,viscous fluids,etc. Gate valves are characterized by a traveling wedge ,which is moved with the operation of the stem nut. Gate valves usually have a minimum pressure drop when fully open,provide tight shut-off when fully closed,and remain relatively free of contamination buildup.