Forged Cryogenic Gate Valve

KOSEN Cast Bronze Gate Valves are designed and manufactured to ensuru leakage of less tjan 100 ppm(parts per million) of volatile organic compounds. Extensive base line laboratory testing (static and cycle testing) has been performed establishing critical design parameters necessary to achieve low emission sealing in the KOSEN stem packing seal area and in the bonnet gasket sealing area, in-house testing procedure has been developed and is periodically performed to ensure that standard product design and manufacting criteria consistently result in the KOSEN Cast Bronze Gate Valve meeting a maximum of 100ppm Voc leakage prior to shipment.

The opening and closing parts of forged steel gate valves are gate plates. The movement direction of the gate is perpendicular to the direction of the fluid, and the forging gate valve can only be fully opened and closed, and can not be adjusted and throttled. The gate of the forging gate valve has two sealing surfaces. The two sealing surfaces of the most commonly used gate valves are wedge-shaped and wedge angles vary with valve parameters.

The DIN Cast Steel Gate Valves are widely used in oil and steam pipelines, such as chemical industry, fire power plant, power plant, etc., for opening or closing the medium in the pipeline., including DIN F5、DIN F7、DIN F4 Rising Stem Gate Valve, DIN F15 Non-Rising Stem Gate Valve, DIN F1、DIN F2 Globe Valve, DIN F32 Angle Globe Valve, DIN F1、DIN F6 Swing Check Valve, DIN F1 Lift Check Valve, DIN Cast Iron Valve etc, Our products are utilized widely in oil, gas, hydraulic, refining chemicals, petrochemicals, pharmaceuticals, food industries, fire-safe systems, marine systems and power stations, etc.

KOSEN Forged Steel Gate Valves are suitable for using on various kinds of pipeline cut off or connect the flowing of medium. By using different material, the valves could be suitable for medium such as water, steam, oil, nitric acid, acetic acid, oxidizing substance, carbamide and etc. Molded flexible graphite is used for packing of Female Threaded Gate Valve. PTFE or combined packing material can be also used if being requested by the customer. The internal surface of the stuffing box, of which area is contacted with the packing, is of excellent finish (Ra 3.2μm). The stem surface, contacting with the packing, should be rolled and pressed after being precisely machined, so as to reach to the high finish and compactness (Ra 0.8μm) and ensure the reliable tightness of the stem area.