Forged Bellow Sealed Gate Valve

KOSEN Forged Steel Gate Valves are suitable for using on various kinds of pipeline cut off or connect the flowing of medium. By using different material, the valves could be suitable for medium such as water, steam, oil, nitric acid, acetic acid, oxidizing substance, carbamide and etc. Molded flexible graphite is used for packing of Female Threaded Gate Valve. PTFE or combined packing material can be also used if being requested by the customer. The internal surface of the stuffing box, of which area is contacted with the packing, is of excellent finish (Ra 3.2μm). The stem surface, contacting with the packing, should be rolled and pressed after being precisely machined, so as to reach to the high finish and compactness (Ra 0.8μm) and ensure the reliable tightness of the stem area.

The Cast Steel Slab gate valves is a sliding valve with closing parts as parallel gates. The shutter can be single gate or double gate with extension mechanism. The pressing force of the gate to the valve seat is controlled by the medium pressure of the floating gate or floating seat. If it is a double gate flat gate valve, the expansion mechanism between the two gates can supplement this compaction force.The flat gate valves can be divided into manual flat gate valves, pneumatic flat gate valves and electric flat gate valves according to the driving mode. It can be divided into flat gate valve with diversion hole, flat gate valve without diversion hole, flat gate valve of oil field, flat gate valve of pipeline and gas plate valve.

The opening and closing parts of gate valves are gate plates, and the movement direction of the gate plates is perpendicular to the direction of the fluid. The gate valves can only be fully opened and closed, and can not be adjusted or throttled. The gate has two sealing surfaces. The two sealing surfaces of the most commonly used mode gate valves form wedges and wedge angles that vary with the parameters of the valve, usually 50 and 2 52'when the medium is not high. The sluice gate of a wedge valve can be made into a whole, called a rigid gate, or a sluice which can produce a small amount of deformation to improve its craft and make up for the deviation produced by the angle of the sealing surface in the process of processing, which is called an elastic gate.

KOSEN VALVE is specialized in manufacturing Socket Welding Forged Gate Valve with following good characteristics: good sealing performance, reliable safety guarantee, long life span and etc. Socket Welding Forged Gate Valve is usually used for DN40 for its economic features, and butt welding ends is for DN40. Socket welding is widely used for small size pipe because they would always have a thin wall thickness which may have problems for butt welding. Moreover, the birdsmouth part of socket welding has the function of reinforcement so that it is also welcomed under high pressure.